60W Automatic Send tin Soldering Iron Gun Solder Stand£»

Features: 
1. Soldering gun used compact mechanical design work easier. 
2. Quality heater, working life longer. 
3. Simple, easy to complete the welding operation. 
4. Rated with a diameter of 0.8 ~ 2.3mm tin line. 
5. Using the voltage 220VAC. 

Use£º
1. Hand gun used for the first time, be warm a few minutes, a smoke is a normal phenomenon, will disappear in a few seconds. 
2. Will be rated into the tin from the tin line into the mouth, and then pull the trigger direction of the arrow until the tin lead solder wire to the nozzle only to be working. 
3. Stop the use or replacement of tin wire to be out, as long as the direction of the board-up drive, and remove the tin wire. 
4. Heater replacement, the first protective cover removed, open the heater connection, and then remove the iron Tsui to the core of the heat can be replaced. 

Notes£º
1. At work, iron and iron pipe Tsui temperatures up to 400 degrees Celsius, non-human touch to prevent burns. 
2. Stop using the hand gun, set it on its bracket. 
3. Work is completed, turn off the power so to save the place after cooling. 

Package Content£º
1 X AC 220V 60W Soldering iron gun